Dripping faucet keeping you up at night, sink drain leaking under the cabinet, or faucet that barely produces any pressure? Pine Rooter diagnoses and repairs faucets, sink supply lines, drain assemblies, and P-traps on the same visit.
A dripping faucet wastes more than 3,000 gallons of water per year, and the repair almost always costs less than the water bill impact over twelve months. Most faucets are fixed with a cartridge replacement or an O-ring swap -- if the faucet body is not cracked and the style is one you want to keep, repair is the right call by a wide margin. Replacement makes more sense when the faucet is very old and parts are no longer available, the body is cracked or corroded, or you want a style change -- in which case a repair visit converts naturally into a fixture installation, since we carry the tools for both.
Cartridge, ball, ceramic disc, and compression faucets all fail differently and require different repair approaches. We identify the faucet type and the specific failure mode before opening anything, so we bring the correct parts and complete the repair in a single visit instead of ordering parts after the faucet is already disassembled.
Cartridges for Moen, Delta, Kohler, Price Pfister, and American Standard cover the majority of faucets in Bothell homes. We carry the most common cartridges and repair kits on every truck so we do not have to leave and come back for a basic part. Less common models can typically be sourced from a Bothell plumbing supply house the same day.
We inspect the supply lines and shutoff valves while we are under the sink on every faucet call. A supply line that is ten years old or showing signs of mineral staining or jacket swelling is a flood risk. If we see it, we tell you. If you want it replaced at the same visit, we do it. If you want to wait, you have the information to make that decision.
If we are under the cabinet repairing a faucet cartridge and the P-trap is dripping, we tell you and address it at the same visit without an additional trip charge. Fixing the dripping P-trap while we are already there is more efficient than scheduling a second visit for a problem we identified and left in place.
After identifying the faucet type and the leak source, we tell you exactly what the repair involves and what it costs. You approve it before we touch a tool. There are no parts charges added after the fact for components that were obviously needed from the start of the diagnosis.
Not every problem under the sink is a faucet problem. Here is a quick way to tell which service actually solves what you are seeing.
A drip from the spout or water under the cabinet is a cartridge, O-ring, or drain-washer repair -- exactly what this service handles.
This service handles itWhen repair parts no longer exist or the fixture body itself is damaged, a full fixture installation replaces it correctly the first time.
See Fixture InstallationSlow drainage even after the faucet and P-trap are repaired points to a clog further down the branch line -- drain cleaning clears it.
See Drain CleaningIf it is not just one fixture, the cause is upstream -- a pressure regulator or main line issue that our water pressure service diagnoses.
See Water PressureKnowing your faucet type before calling helps us arrive with the right parts on the truck. Cartridge faucets are the most common in Bothell homes -- a single handle that lifts and rotates, or two handles that each turn about a quarter-turn. A drip from the spout or seepage from the handle base means the internal cartridge O-rings and seals have worn, and a cartridge swap resolves it.
Ball faucets are identified by a rounded dome cap where the handle meets the body, most common in single-handle kitchen faucets. A worn ball assembly shows up as a drip from the spout or a wobble in the handle, and repair requires a full kit -- ball, springs, seats, and O-rings -- rather than a single part.
Ceramic disc faucets have a wide cylindrical body and a lever that moves up and down rather than rotating through a wide arc. They are the most durable of the three, so a drip usually means a cracked disc from impact or mineral scoring rather than routine wear, and disc replacement or cleaning resolves most issues.
From a single dripping handle to a full under-sink refresh, one visit covers everything connected to the fixture.
Cartridge, ball, and ceramic disc repair kits for all major brands to stop drips at the source.
Slip-joint washer replacement and P-trap realignment to stop leaks under the cabinet.
Aging or corroded supply lines and seized angle stops replaced before they become a flood risk.
Aerator cleaning and single-fixture pressure troubleshooting to isolate the cause before recommending repair.
Kitchen faucet pull-down sprayer hoses and diverter valves repaired or replaced as needed.
Full under-sink inspection to identify every active or developing leak point in one visit, not just the one you called about.
Faucet repair calls start with identifying the exact faucet type and the source of the problem. Getting those two things right determines which part goes in the truck and how long the job takes.
We identify the faucet manufacturer, model, and internal valve type -- cartridge, ball, ceramic disc, or compression. Then we confirm where the water is actually coming from: spout, handle base, supply line connection, or drain assembly. Misidentifying the leak source leads to replacing the wrong component, which is why the diagnostic step matters.
We close the shutoff valves under the sink and open the faucet to drain residual pressure before disassembly. We test the shutoff valves to confirm they fully close. Valves that do not fully close get flagged -- a shutoff valve that fails during disassembly turns a faucet repair into a whole-house water shutoff situation.
The faucet handle, escutcheon plate, and valve assembly are removed to access the cartridge, ball, or disc. We inspect the seat and internal surfaces for scoring or corrosion that might prevent a new cartridge from sealing correctly. A corroded valve seat requires resurfacing or seat replacement in addition to the cartridge swap for the repair to hold.
We carry cartridges, O-ring kits, ball faucet repair kits, and ceramic disc cartridges for the most common brands on the truck. For less common models, we can source the part quickly -- most cartridges are available same-day from Bothell plumbing supply houses. The replacement part is installed, the faucet is reassembled, and handle position is confirmed to be correct before moving to testing.
Supply is restored slowly. We operate the faucet through its full range -- full cold, full hot, and partial flow positions -- and confirm the drip is resolved. We check the handle base and supply connections for any seepage while the faucet is running and after it is shut off. Both conditions need to pass before the faucet is considered repaired.
Since we are already under the cabinet, we inspect the supply lines for age, mineral staining, and swelling, and check every drain joint in the P-trap assembly for seeping or drips. If something adjacent is about to fail or is actively dripping, we identify it now rather than after we have packed up and left. There is no extra charge for looking.
A straightforward cartridge replacement costs less than a new faucet in most cases, which is why we assess and recommend repair before defaulting to replacement. We identify the problem, explain what it takes to fix it, and give you a total before we disassemble anything.
A few habits extend the life of cartridges, supply lines, and drain connections under every sink.
Bothell's soft Cascade snowmelt water has low mineral content, which means aerators and showerheads accumulate far less limescale than in hard-water cities. But the same low mineral content that prevents scale makes Bothell water slightly corrosive to brass and copper over time -- there is less dissolved mineral to coat and passivate metal surfaces, so brass cartridges, valve seats, and internal faucet components wear a bit faster per year than in hard-water regions. Bothell homeowners should expect to replace faucet cartridges roughly every eight to twelve years rather than the twelve to fifteen common elsewhere. The under-sink environment in Bothell homes also tends to run more humid than in drier climates, which means supply line connections and plastic drain washers degrade a little faster and a minor unnoticed drip can develop mold in the cabinet base sooner than it would in a dry region.
Code and licensing guidance: Faucet and sink repair -- cartridge swaps, supply line replacement, and drain assembly work -- is generally considered minor repair and does not typically require a permit in Bothell as long as it does not involve relocating a fixture or altering the rough plumbing. It should still be performed by a licensed plumber, since a supply line or shutoff valve connection done incorrectly is a common source of water damage claims. If a repair uncovers a need to relocate a fixture or add a new connection, that expanded scope may trigger permit requirements, which we identify and handle if the situation calls for it.
Faucet repair is often the starting point for a kitchen or bathroom plumbing visit. Here are the services most commonly combined with a faucet or sink call.